- MISUMI Top Page>
- Automation Components>
- Rotary Power Transmission>
- Timing Belts, Pulleys>
- Timing Pulleys / Idlers>
- Timing belt pulleys / MR3 / flanged pulley selectable / configurable / aluminium, steel>
- Timing belt pulleys / MR3 / flanged pulley selectable / configurable / aluminium, steelPart Numbers>
- GPT72MR3150-A-PUPQ
- Volume Discount
MISUMI
MISUMI
- MISUMI×Timing Pulleys / Idlers
- MISUMI×Timing Belts, Pulleys
- MISUMI×Rotary Power Transmission
Product Details:
Manufacturer part number: GPT72MR3150-A-PUPQ
Brand: MISUMI
Price: 34.82 €
Delivery time: 7 Days
Technical Data:
Belt Width Used: 15 mm
The Number of Teeth: 72 T
Pulley Shape: Shape A
Material: EN 1.1191 Equiv.
Surface Treatment: Not Provided
- New Products
(i)Remark
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GPT72MR3150-A-PUPQ
- Drawing / Specifications
- 3D Preview
- Part Numbers
[ ! ]For Keyway Dimension Details, Click here
| Type | Belt Width |  Material*1 |  Surface Treatment |  Attachment*1Setscrews | |||
| 6mm | 9mm | 15mm | Pulley | Flange | |||
| MR3060 | MR3090 | MR3150 | |||||
| GPA | ● | ● | ● | Aluminum Alloy | Aluminum Alloy | Clear Anodize | Stainless |
| GPB | ● | ● | ● | Black Anodize | |||
| GPK | ● | ● | ● | Hard Clear Anodize*2 | |||
| GPT | ● | ● | ● | 1045 Carbon Steel | Low Carbon Steel | - | Steel (Black Oxide) |
| GPM | ● | ● | ● | Black Oxide | |||
| GPP | ● | ● | ● | Electroless Nickel Plating | |||
*1 Flanges are installed. Set screws are included with PU, NU & C bore hole specification.
*2 Hard Anodize Treatment: Film Hardness 300HV~
■Teeth No. Size
| mm | Teeth No. | |||||||||||||||||||||||||
| 16 | 17 | 18 | 19 | 20 | 21 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 | 44 | 45 | 48 | 50 | 56 | 60 | 62 | 68 | 72 | |
| P.D. | 15.28 | 16.23 | 17.19 | 18.14 | 19.1 | 20.05 | 21.01 | 22.92 | 23.87 | 24.83 | 26.74 | 28.65 | 30.56 | 32.47 | 34.38 | 36.29 | 38.2 | 42.02 | 42.97 | 45.84 | 47.75 | 53.48 | 57.3 | 59.21 | 64.94 | 68.75 |
| O.D. | 14.52 | 15.47 | 16.43 | 17.38 | 18.34 | 19.29 | 20.25 | 22.16 | 23.11 | 24.07 | 25.98 | 27.89 | 29.8 | 31.71 | 33.62 | 35.53 | 37.44 | 41.26 | 42.21 | 45.08 | 46.99 | 52.72 | 56.54 | 58.45 | 64.18 | 67.99 |
| D | 18 | 18 | 20 | 22 | 22 | 25 | 25 | 14 | 16 | 16 | 18 | 20 | 20 | 26 | 26 | 30 | 30 | 32 | 32 | 34 | 34 | 39 | 39 | 39 | 50 | 50 |
| F | 18 | 18 | 20 | 22 | 22 | 25 | 25 | 25 | 28 | 28 | 30 | 32 | 35 | 40 | 40 | 44 | 44 | 48 | 48 | 50 | 52 | 61 | 61 | 61 | 74 | 74 |
| E | 11 | 11 | 13 | 14 | 14 | 16 | 16 | 16 | 18 | 18 | 20 | 23 | 25 | 28 | 28 | 32 | 32 | 36 | 36 | 38 | 40 | 46 | 46 | 46 | 58 | 58 |
■Belt Width Size
| mm | Belt Width | ||
| MR3060 | MR3090 | MR3150 | |
| A | 7.1 | 10.2 | 16.7 |
| W | 11.1 | 14.2 | 20.7 |
| L | 19.0 | 23.0 | 29.0 |
Specifications
| Part Number | Pulley Shape | Shaft Bore Specs., I.D. | Z | J | Q | R | S | T | |||||||||
| (Shaft Bore Specs.: H, P, N, C) | GPA20MR3060 | - | A | H6 | |||||||||||||
| (Shaft Bore Specs.: V, F) | GPT40MR3090 | - | B | - | V6 | - | Z10 | - | J5 | ||||||||
| (Shaft Bore Specs: Y) | GPM60MR3090 | - | B | - | Y8 | - | Q12 | - | R12 | - | S3 | - | T3 |
| ◆mm | ◆inch | ||||||||||||||||||||||||
| Part Number | Pulley Shape | Pulley Shape | Pulley Shape | ||||||||||||||||||||||
| Type | Teeth No | Belt Width | A | B・K | B | A | B・K | B | |||||||||||||||||
| Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | Shaft Bore Spec. (1mm Increment) | |||||||||||||||||||||||
| H(d) | P(d) | N(d)・C(d) | V | Y | H(d) | P(d) | N(d)・C(d) | V・F | HU(d) | PU(d) | NU(d) | HU(d) | PU(d) | NU(d) | |||||||||||
| Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Both Ends Stepped Hole | Round Hole | Round Hole+Tap | Keywayed Bore + Tap | Stepped Hole | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | Inch Round Hole | Inch Round Hole+Tap | Inch New JIS Key Groove Hole + Tap | |||||||||||
| V(d) | Z | J | Y(d) | Q・R | S・T | V(d)・ F(d) | Z | J | |||||||||||||||||
| Z-d≥2 | (0.1mm increment) | Q(R)-d≥2 | (0.1mm increment) | Z-d≥2 | (0.1mm increment) | ||||||||||||||||||||
| Al GPA GPB GPK Fe | 16 | MR3060 *A : 7.1 *W : 11.1 *L : 19.0 MR3090 MR3150 | A K | 4~7 | 4・5 | - | 4・5 | 6・7 | 2.0≤J≤W-2.0 | 4・5 | 6・7 | 3~9 S+T≤W-3 | 4~7 | 4~7 | 2.0≤J≤L-2.0 | B・C | - | - | B・C | B | - | ||||
| 17 | 4~7 | 4・5 | 4・5 | 6・7 | 4・5 | 6・7 | 4~7 | 4~7 | B・C | - | - | B・C | B | - | |||||||||||
| 18 | 4~9 | 4~6 | 4~7 | 6~9 | 4~7 | 6~9 | 4~8 | 4~8 | B-D | - | - | B-D | B | - | |||||||||||
| 19 | 4~10 | 4~6 | 4~8 | 6~10 | 4~8 | 6~10 | 4~8 | 4~8 | B-E | - | - | B-D | B | - | |||||||||||
| 20 | 4~10 | 4~6 | 4~8 | 6~10 | 4~8 | 6~10 | 4~8 | 4~8 | B-E | - | - | B-D | B | - | |||||||||||
| 21 | 4~10 | 4~6 | 4~8 | 6~10 | 4~8 | 6~10 | 4~8 | 4~8 | B-E | - | - | B-D | B | - | |||||||||||
| 22 | 4~12 | 4~8 | 4~10 | 6~12 | 4~10 | 6~12 | 4~10 | 4~10 | B-E | - | - | B-E | B-E | - | |||||||||||
| 24 | A B | 4~12 | 4~10 | - | 4~10 | 6~12 | 4~10 | 6~12 | 4~10 | 4~8 | - | 4~8 | 6~10 | B-E | B-E | - | B-E | B-E | - | ||||||
| 25 | 4~14 | 4~11 | 8~11 | 4~12 | 6~14 | 4~12 | 6~14 | 4~12 | 4~10 | 8 | 4~10 | 6~12 | B-F | B-E | D・E | B-E | B-E | D | |||||||
| 26 | 5~14 | 5~11 | 8~11 | 5~12 | 7~14 | 5~12 | 7~14 | 5~12 | 5~10 | 8 | 5~10 | 7~12 | C-F | C-E | D・E | C-E | C-E | D | |||||||
| 28 | 5~16 | 5~13 | 8~13 | 5~14 | 7~16 | 5~14 | 7~16 | 5~14 | 5~10 | 8 | 5~12 | 7~14 | C-G | C-F | D-F | C-E | C-E | D | |||||||
| 30 | 6~19 | 6~15 | 8~14 | 6~17 | 8~19 | 6~17 | 8~19 | 6~16 | 6~12 | 8~11 | 6~14 | 8~16 | C-G | C-F | D-F | C-G | C-E | D・E | |||||||
| 32 | 6~21 | 6~17 | 8~17 | 6~19 | 8~21 | 6~19 | 8~21 | 6~16 | 6~12 | 8~11 | 6~14 | 8~16 | C-H | C-G | D-F | C-G | C-E | D・E | |||||||
| 34 | 6~24 | 6~18 | 8~18 | 6~22 | 8~24 | 6~22 | 8~24 | 6~22 | 6~18 | 8~15 | 6~20 | 8~23 | C-J | C-G | D-G | C-H | C-G | D-F | |||||||
| 36 | 6~24 | 6~18 | 8~19 | 6~22 | 8~24 | 6~22 | 8~24 | 6~22 | 6~18 | 8~15 | 6~20 | 8~23 | C-J | C-G | D-G | C-H | C-G | D-F | |||||||
| 38 | 6~24 | 6~18 | 8~19 | 6~22 | 8~24 | 6~22 | 8~24 | 6~22 | 6~18 | 8~15 | 6~20 | 8~23 | C-J | C-G | D-G | C-H | C-G | D-F | |||||||
| 40 | 8~28 | 8~23 | 8~23 | 8~26 | 10~28 | 8~26 | 10~28 | 8~26 | 8~21 | 8~17 | 8~24 | 10~26 | E-K | E-J | E-J | E-K | E-H | E-G | |||||||
| 44 | 8~32 | 8~26 | 8~25 | 8~30 | 10~32 | 8~30 | 10~32 | 8~28 | 8~23 | 8~18 | 8~26 | 10~28 | E-L | E-J | E-J | E-K | E-H | E-G | |||||||
| 45 | 8~32 | 8~26 | 8~25 | 8~30 | 10~32 | 8~30 | 10~32 | 8~28 | 8~23 | 8~18 | 8~26 | 10~28 | E-L | E-J | E-J | E-K | E-H | E-G | |||||||
| 48 | 8~34 | 8~28 | 8~27 | 8~32 | 10~34 | 8~32 | 10~34 | 8~30 | 8~25 | 8~20 | 8~28 | 10~30 | E-L | E-J | E-J | E-K | E-H | E-G | |||||||
| 50 | 8~36 | 8~30 | 8~29 | 8~34 | 10~36 | 8~34 | 10~36 | 8~30 | 8~25 | 8~20 | 8~28 | 10~30 | E-M | E-K | E-K | E-K | E-J | E-H | |||||||
| 56 | 8~36 | 8~30 | 8~29 | 8~34 | 10~36 | 8~34 | 10~36 | 8~30 | 8~25 | 8~20 | 8~28 | 10~30 | E-M | E-K | E-K | E-K | E-J | E-H | |||||||
| 60 | 8~42 | 8~35 | 8~35 | 8~40 | 10~42 | 8~40 | 10~42 | 8~35 | 8~30 | 8~22 | 8~33 | 10~35 | E-P | E-M | E-L | E-M | E-K | E-H | |||||||
| 62 | 8~42 | 8~35 | 8~35 | 8~40 | 10~42 | 8~40 | 10~42 | 8~35 | 8~30 | 8~22 | 8~33 | 10~35 | E-P | E-M | E-L | E-M | E-K | E-H | |||||||
| 68 | 8~42 | 8~35 | 8~35 | 8~40 | 10~42 | 8~40 | 10~42 | 8~35 | 8~30 | 8~22 | 8~33 | 10~35 | E-P | E-M | E-L | E-M | E-K | E-H | |||||||
| 72 | 8~54 | 8~46 | 8~45 | 8~52 | 10~54 | 8~52 | 10~54 | 8~46 | 8~38 | 8~33 | 8~44 | 10~46 | E-S | E-Q | E-Q | E-Q | E-N | E-L | |||||||
 Shaft Bore Dia.4.5・6.35 are selectable for Shaft Bore specifications H, P, V. Shaft bore specification P is not selectable for A Shape with 22 or less teeth and nominal width 060. | J~Q are not available for MR3060 | ||||||||||||||||||||||||
| Shaft Bore Dia. 9 is not available for Shaft Bore specification N. Shaft Bore Dia. 8, 9, 11, 13, 14, 17, 21-45 are not available for Shaft Bore specification C. | J~N are not available for MR3060 and MR3150 | ||||||||||||||||||||||||
| M~N are not available for MR3090 | |||||||||||||||||||||||||
| Inch Bore Specifications | Inch Bore Specifications | Inch Bore Specifications | ||||||||||||||||||||
| No. | Decimal (Inch) | Nominal (Inch) | Decimal (mm) | Set Screw size | b (W) (inch) | t1 (T) (inch) | No. | Decimal (Inch) | Nominal (Inch) | Decimal (mm) | Set Screw size | b (W) (inch) | t1 (T) (inch) | No. | Decimal (Inch) | Nominal (Inch) | Decimal (mm) | Set Screw size | b (W) (inch) | t1 (T) (inch) | ||
| A | 0.125 | 1/8 | 3.175 | #5-40 | - | - | H | 0.750 | 3/4 | 19.050 | #10-32 | 3/16 | 0.837 | M | 1.375 | 1 3/8 | 34.925 | 5/16-18 | 5/16 | 1.518 | ||
| B | 0.188 | 3/16 | 4.763 | #5-40 | - | - | HJ | 0.813 | 13/16 | 20.638 | #10-32 | 3/16 | 0.900 | MN | 1.438 | 1 7/16 | 36.513 | 5/16-18 | 3/8 | 1.605 | ||
| C | 0.250 | 1/4 | 6.350 | #8-32 | - | - | J | 0.875 | 7/8 | 22.225 | 1/4-20 | 3/16 | 0.964 | N | 1.500 | 1 1/2 | 38.100 | 5/16-18 | 3/8 | 1.669 | ||
| D | 0.313 | 5/16 | 7.938 | #8-32 | 3/32 | 0.357 | JK | 0.938 | 15/16 | 23.813 | 1/4-20 | 1/4 | 1.051 | P | 1.625 | 1 5/8 | 41.275 | 5/16-18 | 3/8 | 1.796 | ||
| E | 0.375 | 3/8 | 9.525 | #8-32 | 3/32 | 0.421 | K | 1.000 | 1 | 25.400 | 1/4-20 | 1/4 | 1.114 | PQ | 1.688 | 1 11/16 | 42.863 | 5/16-18 | 3/8 | 1.859 | ||
| EF | 0.438 | 7/16 | 11.113 | #8-32 | 3/32 | 0.484 | KLA | 1.063 | 1 1/16 | 26.988 | 1/4-20 | 1/4 | 1.178 | Q | 1.750 | 1 3/4 | 44.450 | 5/16-18 | 3/8 | 1.922 | ||
| F | 0.500 | 1/2 | 12.700 | #8-32 | 1/8 | 0.56 | KLB | 1.125 | 1 1/8 | 28.575 | 1/4-20 | 1/4 | 1.241 | QR | 1.813 | 1 13/16 | 46.038 | 5/16-18 | 1/2 | 2.032 | ||
| FG | 0.563 | 9/16 | 14.288 | #8-32 | 1/8 | 0.623 | KLC | 1.188 | 1 3/16 | 30.163 | 1/4-20 | 1/4 | 1.304 | R | 1.875 | 1 7/8 | 47.625 | 5/16-18 | 1/2 | 2.096 | ||
| G | 0.625 | 5/8 | 15.875 | #10-32 | 3/16 | 0.709 | L | 1.250 | 1 1/4 | 31.750 | 1/4-20 | 1/4 | 1.367 | RS | 1.938 | 1 15/16 | 49.213 | 3/8-16 | 1/2 | 2.160 | ||
| GH | 0.688 | 11/16 | 17.463 | #10-32 | 3/16 | 0.773 | LM | 1.313 | 1 5/16 | 33.338 | 1/4-20 | 5/16 | 1.455 | S | 2.000 | 2 | 50.800 | 3/8-16 | 1/2 | 2.223 | ||
Alterations
BC,TPC and SLH alternations are not available for inch bores.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Plug-in is required for 3D Preview
Part Number |
|---|
| GPT72MR3150-A-PUPQ |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard | Belt Width Used (mm) | The Number of Teeth (T) | Pulley Shape | Material | Surface Treatment | Shaft Bore Dia. d (inch) | Shaft Bore Spec. (inch) | 01.[H] Shaft Bore Spec. (Round Hole) (mm) | 02.[P] Shaft Bore Spec. (Round Hole + Tap) (mm) | 03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap) (mm) | 04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) | 05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap) | 06.[V] Shaft Bore Spec. (Stepped Hole) (mm) | 07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side) (mm) | 08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34.82 € | 1 | Available | 7 Days | 15 | 72 | Shape A | EN 1.1191 Equiv. | Not Provided | 1-11/16 | [PU] Inch Round Hole+Tap | - | - | - | - | - | - | - | - |
Loading...
- 1
Basic information
| Type | Timing Pulleys | Belt Type | MR3(for PowerGrip® GT®3) | Timing Pulleys/Idlers | Pulleys |
|---|
Configure
1Suggestion of an applicable part number.
Some specification is not specified yet.
The part number is completed.
Basic Attributes
-
Belt Width Used(mm)
- 6
- 9
- 15
-
The Number of Teeth(T)
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 28
- 30
- 32
- 34
- 36
- 38
- 40
- 44
- 45
- 48
- 50
- 56
- 60
- 62
- 68
- 72
-
Pulley Shape
- Shape A
- Shape B
- Shape K
-
Material
- EN 1.1191 Equiv.
- Aluminum
- Aluminum Alloy
-
Surface Treatment
- Not Provided
- Black Oxide
- Clear Anodized Aluminum
- Black Anodized Aluminum
- Hard Clear Anodize
- Electroless Nickel Plating
-
Shaft Bore Dia. d(inch)
- 1
- 1-15/16
- 1-13/16
- 1-11/16
- 1-7/8
- 1-7/16
- 1-5/8
- 1-5/16
- 1-3/4
- 1-3/8
- 1-3/16
- 1-1/2
- 1-1/4
- 1-1/8
- 1-1/16
- 1/2
- 1/4
- 2
- 3/4
- 3/8
- 3/16
- 5/8
- 5/16
- 7/8
- 7/16
- 9/16
- 11/16
- 13/16
- 15/16
-
Shaft Bore Spec.(inch)
- [HU] Inch Round Hole
- [NU] Inch Key Grove Hole+Tap
- [PU] Inch Round Hole+Tap
-
01.[H] Shaft Bore Spec. (Round Hole)(mm)
- 4
- 4.5
- 5
- 6
- 6.35
- 7
-
02.[P] Shaft Bore Spec. (Round Hole + Tap)(mm)
- 4
- 4.5
- 5
- 6
- 6.35
- 7
-
03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap)(mm)
- 8
- 10
- 11
- 12
- 13
- 14
-
04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)
- 10
-
05.[C] Shaft Bore Spec. (Old JIS Keyway Hole + Tap)
- 10
- 12
- 15
- 16
- 18
- 19
- 20
-
06.[V] Shaft Bore Spec. (Stepped Hole)(mm)
- 4
- 4.5
- 5
- 6
- 6.35
- 7
-
07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side)(mm)
- 4.5
- 6.35
-
08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole)
- 4
- 4.5
- 5
- 6
- 6.35
- 7
-
Type
- GPA##MR3060
- GPA##MR3090
- GPA##MR3150
- GPB##MR3060
- GPB##MR3090
- GPB##MR3150
- GPK##MR3060
- GPK##MR3090
- GPK##MR3150
- GPM##MR3060
- GPM##MR3090
- GPM##MR3150
- GPP##MR3060
- GPP##MR3090
- GPP##MR3150
- GPT##MR3060
- GPT##MR3090
- GPT##MR3150
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Inquiry
